Measuring myself for pant/trouser
To Ensure Proper Fit :
Yourself Just Prior to Placing an Order
2. Fill in all these measurements before ordering
3. If possible, have yourself measured by professional
4. Do not make extra allowances
5. Do not pull Inch Tape too tight
6. Ensure that you take the measurements at the same places as
shown in the image.
giving measurement for pant you must wear a trouser, which you feel,
that it is best trouser you have which gives you comfortable feeling and
the fitting you want. Then take the exact measurement without allowance
for pant as shown in diagram (photograph) against each measurement. If
you are not clear about any measurement then read and follow the
respective instruction for that measurement twice or thrice.
Measurements in :
Measure around your waistline just above the waistband of your trousers,
making sure the tape does not ride over it. Measure to a tightness you
would feel comfortable wearing. Measure to the nearest 1/2-inch.
Measure around your hips and buttocks at their widest point. Make sure you
don't have anything in your pockets; otherwise you may get a measure which
is too large. Measure to the nearest 1/2-inch.
U or Rise Measurement
Measure in U shape from front top of the waistband of the trouser going
under the crotch then to the back top of the waistband of the trouser as
shown in complete with two figures 4 and 5
Front Crochet Measurement
First spread the legs little bit then Measure from top of the trouser to
the point of intersection (crotch) of the two legs of the trouser. This
length you can see by making the hand straight open keeping it at right
angle to ground and then touching the tip of the index finger at the
lowest point of intersection of the trouser and noting the measurement
from the tape where top portion of the index finger touches the tape as
shown in figure
Trouser outside Length
Measure the length of your trouser from the top of the waistband down to
the bottom of the trouser leg. Measure down the side of your trouser leg
seam and remember to measure to the bottom of the required length, even if
you intend to have turn-ups. The length should be long enough so that the
trouser bottoms touch the shoe all the way around. Measure to the nearest
Measure around your trouser bottoms of a trouser you like the cut of. The
simplest way is to measure across the width of the bottom when pulled flat
and then double the measurement.
TERMS & CONDITIONS
weeks for processing and delivery of
Customers must provide full, accurate and legible information in the
order form/measurement Chart.
duties and other levies in destination country are responsibility of the
Customers must provide up to
every endeavor has been made to accurately reproduce colors, there may
be minor variations in color
of the actual product because of the
nature of fabric dyes.
offered are subject to availability at the time of placing your order.
transactions are subject to Jodhpur Jurisdiction only.
most items are custom-made, refunds or exchange cannot be entertained.